Home > ATS Tactical >

  ATS 762 Split Front Chest Harness
ATS 762 Split Front Chest Harness
ATS 762 Split Front Chest Harness


 
Alternative Views:



List Price: $99.95
Our Price: $94.95

Product Code: ATS.514


Color*:
  
 
• Ships in 1 business day, or your order ships Free.*
• If you can add it to cart, it's in stock!

Qty:  
DESCRIPTION AVAILABILITY
 

ATS 762 Split Front Chest Harness

This harness was designed by an SF friend of ATS for a deploying unit that needed the capability to switch between weapons load outs. Ultimately, they decided on this split front harness to solve that problem. The harness is constructed of 500DCordura with Murdock Webbing’s Jacquard Multicam nylon used for the PALS webbing. Each pouch holds a single 7.62 M14/M1A, SR25, FAL/L1A1, G3, or Magpul LR20 magazine. They are held in by ATS’s bungee retention system, with Murdock Webbing nylon pull tabs. Each side of the harness has a built in 9”x 7” map pocket. To the outside of each side of the rig there are two channels and three rows of PALS webbing. Each magazine pocket of the harness also has two channels and three rows of PALS on its face.

Each side of the harness is 10” x 7”, and the harness is closed by two ITW/Nexus GhillieTEX 1” Fastex side release buckles. Overall width of the harness is about 22 ½”. To reduce weight, the waist belt has been redesigned to release only from the left side, and a webbing retainer has been added to secure the running end of the strap. The upper harness attachment points use the lighter ITW/Nexus Ladderloc and along with the webbing retainer. The shoulder straps have also been redesigned to accommodate their MCH Hydration Harness or a smaller and lighter modular carrier such as the ATS 50 Ounce Hydration Carrier. The cross strap portion of the harness has a very lightweight 4 channel and 4 row grid of PALS webbing with a clever design that does away with the base material that PALS is usually sewn to, instead using a double row of Murdock webbing bar tacked to itself and box-X stitched to the harness.

As with all ATS Tactical gear, the 7.62 Split Front Chest Harness has a lifetime guarantee and is Made in the USA.




5 of 5 | Total Reviews: 1 Write a Review

  0 of 0 people found the following review helpful:
 
Works for AK mags, sorta June 25, 2014
Reviewer: Jeff from Gahanna, OH United States  
I know it doesn't list ak mags in the list of mags for this harness, but I was looking for a good simple harness for those and decided to try this one. The AK mags do fit, and the bungee will stretch over the top. They seem to hold ok, but if you were planning on running this rig with those mags in any serious situation you will want to modify the mag or mag pouch. Inside the mag pouch is a small strip of loop Velcro so I was planning on trying the kiwi type kydex insert to add a little more security. Not a lot if extras with this system. The interior map pocket is a nice feature that allows you to tuck a few extra items in.

Was this review helpful to you?


Browse for more products in the same category as this item:

ATS Tactical
Chest Rigs
ATS Tactical > Chest Rigs
Chest Rigs > 762 Chest Rigs
Color > MultiCam
Color > Black
Color > Ranger Green
Color > Coyote Brown