HSGI ESAPI Side Plate Carrier Adapter
  HSGI ESAPI Side Plate Carrier
HSGI ESAPI Side Plate Carrier


 
Alternative Views:




List Price: $90.00
Our Price: $90.00

Available in BLK, KH, MC and SG.
Colors not shown in drop-down are out of stock.

Product Code: HSG.503


Color*:
  
 
• Ships in 1 business day, or your order ships Free.*
• If you can add it to cart, it's in stock!

Qty:  
DESCRIPTION
 

HSGI ESAPI Side Plate Carrier Adapter

The E-SSPCA (E-SAPI Side Plate Carrier Adapter)- addresses some issues with the HSGI 'Satch series and provides the means of carrying side plates adaptable to plate carriers.

Features and functions:
  •   Adds ability to support 8" x 9" side armor plates with the additional soft armor inserts.
  •   Additional MOLLE/PALS webbing to the original platform on sides.
  •   Addresses the issue of flexibility for the user as the cummerbund has adjustable shock-cord expansion to allow the user to breathe during vigorous activities.
  •   Addresses the looseness of the Satch series as mags are extracted. Being an adjustable cummerbund, the shock-cord allows the rig to tighten up as mags are extracted (if adjusted correctly).
  •   More MOLLE/PALS webbing to the rear panel.
  •   Works well with some other gearmakers' plate carriers. (Some carrier designs may offset the adapter off by only 1.5") Contact HSGI for details.
  •   Better access to secure the rig as the side release buckles are up near front.
  •   Adjustable for when using flak or just as a plate carrier.
Made in the USA and carries HSGI Lifetime warranty.



Rating: Read 8 Reviews Write a Review

  0 of 0 people found the following review helpful:
 
! November 8, 2010
Reviewer: Eric Findlay from Sherwood Park, AB Canada  
I have not bought this product yet but i would like to ask a question, stupid as it might be i would just like to make sure. If i buy this would it give me it for one side or both.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Can help a lot September 22, 2010
Reviewer: Satin from Moscow, Moscow Russia  
This adapter helps to stabilize Waasach, when fully loaded without SAPI plates. Had no problem with that stuff.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works like its supposed to. September 7, 2010
Reviewer: Justin Hall from Winston-Salem, NC United States  
I use this with my woosatch.  I do not use this to carry plates but to make the carrier easier to put on.  The cummerbund puts the buckles on your front rather than one large buckle at your rear.  That rear buckle is a pain to buckle with plates in the carrier.  It also makes the carrier more stable and easier to breath in.  It flexes with you rather than being a solid strap.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Tough, light, effective July 14, 2010
Reviewer: grant shymske from Kalamazoo, MI United States  
Like all HSGI gear its top notch quality fabric and construction. But if you were looking for super easy, ready to go out of the box stuff then the low cost of this item should have tipped you off. You have to work with it, just like any soldier kit, with a sharp knife, a lighter, 550 cord, 100mph tape and some spare time it will run with the best of them.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
gets the job done, kinda July 10, 2010
Reviewer: Will from Ft. Benning, GA United States  
ok let me start of by saying i really like the weesatch, and hsgi as a company.  that said i am not impressed with the design of this Side Plate Carrier Adapter.  Its construction is top notch but just not well thought out.  

you start by attaching clips to the front of the rig which further colapse the side pockets of the rig.  from there you overlap the tails of the side plates and weave an elastic shoelace through the molle and secure it with cord locks.  WTF? from there you disconnect the front of one of the side plate carriers, wad it up, and slide on the rear adapter.  This covers of the elastic cluster F. the rear adapter covers the back 2/3rds and is attached with 4 molle locks (included). This adds unnecessary weight, bulk, and heat to the back of the otherwise super nice rig.  It just doesn't make sense not to make a full replacement rear, and i am not sure how the cord locks will feel with a ruck on.  with all that said i will likely keep it because i need the space.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

HSGI > All HSGI
HSGI > Plate Carriers
Plate Carriers > All Plate Carriers & Accessories
MultiCam Gear > All Crye MultiCam® Gear
MultiCam Gear > MultiCam® Plate Carriers
HSGI
MultiCam Gear
Plate Carriers
Color > Black
Color > MultiCam
Color > Khaki
Color > Smoke Green


$85.00
$109.00
$34.00
$79.00