FirstSpear Overlap Cummerbund, 6/12™, Tubes™
Responding to a specific request from a FS Professional User at the Tip
of the Spear the Overlap Cummerbund has been designed and engineered to
provide additional overlapping soft armor at the front side of the
plate carrier where the Tubes™ closure system meets. The additional soft
armor tucks in behind the Tubes™ allowing full opening and closing of
The body side of the Cummerbund has been modified to allow the
attachment of Ragnar™ Pockets so that magazines and other items can be
held in close to the body making for an even more streamlined
silhouette. This feature is particularly attractive for Users trying to
carry more magazines than traditional front loading of the carrier will
allow, tubular assaults or working in the tight confines of a
The overlap cummerbund will integrate with a
number of FirstSpear carriers including the SAPI or MBAV cut Strandhögg
and Assaulter Armor Carrier. Available now in limited colors and sizes
Shown with SAPI cut strandhögg and Ragnar (hook backed) pockets - Sold
How to measure for your Cummerbund
*Measure your chest around the widest part (usually at nipple height) and it should correspond with your jacket size if you know it. Compare that measurement with the sizes below to select your cummerbund.
S - One Half = 19" | min=27.75" | max= 40"
M - One Half = 19.75" | min=29" | max=42.5"
L - One Half = 21" | min=32.25" | max=45"
XL - One Half = 22.5" | min=35.5" | max=49"
**Min & Max Measurements taken with 1" of "velcro bite" where both halves join.
If you are in between 2 sizes we recommend trying the smaller of the two sizes first. These sizing suggestions are general guidelines. There are multiple variables in play that make fitting armor an imperfect process at best but this will put most people into the size they need to be. Adding PIG AFC Pontoons will reduce the size and fit while increasing comfort considerably.