Home > All Brands >

HSGI SlimGrip Belt
HSGI SlimGrip Belt

Alternative Views:

List Price: $79.00
Our Price: $79.00

Product Code: HSG.710



HSGI SlimGrip Belt

All the performance of the Sure Grip, but at a lower weight and lower profile.

This modular padded belt system is the next generation of the HSG padded belt family. All the performance of our original system, but at a lower weight and lower profile. Can be purchased as a stand alone sleeve or with a 1.5" cobra belt with inner velcro.

  • 0.75" thick and 3.0" tall
  • Neoprene padding creates a “gel like comfort”
  • Adds a level of grip that is unlike any other low profile belt system on the market
  • Two access ports at 3 and 9 o’clock positions for the attachment of subloads like holsters and mag pouches directly to the interior belt
  • Assembled with a removable HPDE stiffener to add stability and to help install a Velcro® lined interior belt

Order a COBRA Riggers Belt for the ultimate Sure-Grip Padded Belt Setup!! When Ordering To Be Worn As An Inner Belt For The Sure-Grip Padded Belt, Order Larger Than The SGPB Itself (Small is 28-30 order a 32" COBRA, Medium is 32-34 order a 36" COBRA, Large 36-38 order a 42" COBRA, Extra-Large is 40-42 Order a 46" COBRA) And Add Loop Material To The Inside.

All belts are made to pants waist sizes between 2 sizes. How it actually fits depends on where you wear it around your body, as some hips are wider than waists.. Please use the chart below to figure out the best size for you. Take a cloth tape and measure where you are gonna wear the belt. So basically the measurement around your waist, find the closest Around Your Waist Measurement that you are over in the chart below. If you measure 44.5 around your waist, pick up the Large Modular Belt because the XL will overlap. If cloth tape is not available a piece of string or rope used then measured will work. The object is to get the ends as close together as possible without overlapping. A Gap of up to 5" may be present on some wearers.

The Belt Size (Your Pants Size) -- Around Your Waist Measurement -- Columns of MOLLE
  • Small Modular Belt (28"-30") -- 30.5" end to end -- Approximately 16 Columns of MOLLE
  • Medium Modular Belt (32"-34") -- 35.5" end to end -- Approximately 20 Columns of MOLLE
  • Large Modular Belt (36"-38") -- 41" end to end -- Approximately 23 Columns of MOLLE
  • X-Large Modular Belt (40"-42") -- 46.5" end to end -- Approximately 27 Columns of MOLLE
Covered by HSGI's Lifetime Warranty. Made in the USA.

Frequently Bought Together:
EGL Loppy Dump Pouch™ Gen II, Molle Blue Force Gear Ten-Speed Double Mag Pouch w/ Helium Whisper Backing Esstac DST Blow Out Medical Pouch HSGI Cobra Rigger's Belt w/ Interior Velcro - 1.5"

Our Price:
Our Price: $39.00
Our Price: $50.00
Our Price: $79.00
EGL Loppy Dump Pouch Blue Force Gear Ten-Speed Double Mag Pouch Esstac DST Blow Out Medical Pouch HSGI Cobra Rigger's Belt w/ Interior Velcro - 1.5"

4.5 of 5 Total Reviews: 16 Write a Review

  0 of 0 people found the following review helpful:
A great product made better March 23, 2017
Reviewer: George A Tamayo from Bronx, NY United States  
I originally had the HSGI battle belt Ver.1 and it's a great piece of gear.  It has finally been made better,  HSGI has cutdown on the weight which enhances mobility and cuts down on heat when training in summer.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Oustsanding battle belt January 10, 2017
Reviewer: david from AZ, United States  
I've been very happy with this belt. I hate standard belts as they take up too much space and shift constantly during training. The slimgrip fits as intended and the backing firmly hugs your body. I run mine right above my belt line where it rests on my hips. This belt is ideal if you run a PC or if you just prefer smaller lighter gear. Only 2 rows of webbing for mounting attachments, this is a significant downside. However the belt doesn't twist or sag with weight on it. If you have large pouches with normal molle straps, you have a problem here as those pouches are meant to be weaved in and out of multiple rows. Any malice clip or similar mounting system will work completely fine. I especially love that there are cutouts at 3 and 9 o'clock that give you direct access to the inner belt to hang holsters or other accessories off of. Installation of the inner belt is also a breeze.

I have roughly a 32" waist and run the medium slimgrip with a large inner belt.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Phenomenally grippy November 27, 2016
Reviewer: Zach from Utah  
I've had complications with other belts slipping and sliding around, from the VTAC belt, Eagle Industries, and other well-known brands. This belt sits very comfortably under well-fitted armor and stays in place without being unnecessarily tight. Holds the basics and has room to spare. A word of caution: follow the HSGI sizing video when determining the size you order, it's critical.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Had to slightly modify belt. August 31, 2016
Reviewer: Bill K from VA United States  
The belt is made well, but I don't carry a drop holster (holster is even with belt), so the drop slots had to be modified.  I need to read product descriptions better.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
HSGI SlimGrip Belt August 31, 2016
Reviewer: JJ Kuri from Fort Bragg , NC United States  
Great belt, grip works great. SKDtac did an awesome job with the size description. I got the belt for a buddy who is 5'10, about 200lb and He wanted the small to have some space in the front with just inner belt and no Molly and or padding. He carries about 3-4 200rd Saw drums on the belt and stays put no matter how fast/hard he moves! It does get just a little hotter than other belts, but that's what you sacrifice to make it stay better with the grip.
Like always great service, products and fast shipping from SKD!

Was this review helpful to you?

View All Customer Reviews