SKD Aimpoint QRP2 Riser (PRO/COMP M4)
Introducing the NEW SKD AIMPOINT QRP2 RISER for the Aimpoint
PRO and Comp M4!
The Aimpoint PRO and Comp M4 optics ship with a perfectly
usable mounting system that often gets tossed in the random parts bin to
upgrade to a taller aftermarket mount.
With new mounts often costing in excess of $150, accessorizing your
Aimpoint optic can strain your wallet.
With the NEW SKD AIMPOINT QRP2 RISER, you can upgrade your existing
factory QRP2 mount to a modern height option for merely $40! Or when purchasing an Aimpoint PRO from us, you can add an SKD AIMPOINT
QRP2 RISER for only $20 more!
Four riser heights are offered for the most popular
- The 1.73” Riser will place the center of the optic at 1.73”,
which is the classic Bottom 1/3 Co-Witness position, allowing for fixed iron
sights to be constantly visible for immediate use when needed, while keeping
the iron sight picture at the bottom 1/3 of your Field of View so you have an
uncluttered red dot view.
- The 1.93” Riser will offer you a largely unimpeded FOV when
using over your PEQ-15 and matches the height of the LaRue 1.93” Mounts. Even for those not using the IR aiming
devices, the 1.93” Riser will allow for an upright head position for quickly
finding your dot and reducing neck fatigue, while not being too high to shoot
from the prone.
- The 2.04” Riser will allow you to keep the exact same optic
mounting height for shooters using a 2.04” Geissele mount for their Low Power
Variable Optics, and also allows for in-line mounting of a CNVD that is secured
to 1/2” Riser.
- The 2.26” Riser provides an affordable entry-level solution
to use your Aimpoint with the new Unity FAST Flip to Center Magnifier hotness,
while staying within a budget. We view
this Riser on a PRO or Comp M4 as the gateway mount to eventually using an
Aimpoint Micro Optic coupled with the Unity FAST Mount.
The SKD Aimpoint QRP2 Riser is also Bidirectional. Many shooters dislike the left-side
orientation of the large torque knob on the QRP2 and Comp M4 mounts because it
can sometimes impede AR15/M4 bolt-catch manipulation and can get hung on gear
for most right-handed shooters. With the
SKD Aimpoint QRP2 Riser, you can now mount the QRP2 Riser base in the opposite
direction by design, with the knob on the right-side of the receiver, keeping
the left side of the receiver clear and open for bolt-catch manipulations. When the torque knob is mounted above or near
the ejection port, it will not get in the way of your ejection pattern, but it
will collect fouling easily so we recommend masking the knob with painters tape
for extended training sessions.
The SKD Aimpoint QRP2 Riser was designed for SKD by our
friends at Arisaka Defense, and uses specifications from Aimpoint factory
drawings and Aimpoint factory finish specs.
Made from 6061-T651 Aluminum with
Mil-A-8625 Type III Class 2 Hard Anodizing, this quality part is MADE IN
USA and will provide a lifetime of hard use.